Back to all bulb sizes
7440

Turn Signal

Rear
AP2
Incandescent
2
Notes and upgrade options

Single filament wedge bulb on AP2 cars: Honda part 33303-S30-003, the same T20 21W single filament used in the front turn signals. On an AP2 the rear lamp takes four identical 7440s, two for the turn signals and two for the reverse lights, because the tail and brake function is LED.

Bulb charts commonly list a 7443 here. That is the dual filament version; it fits and works, but the factory bulb is the single filament 7440.

The changeover is confirmed at model year 2004. Honda catalogues the AP1 amber bulb and its socket for 2000 to 2003 only, and neither appears in the 2004 parts diagram.

Source: Honda parts catalogue, bulb 33303-S30-003, described by Honda as "BULB (T20) (12V 21W) (KOITO) (SINGLE FILAMENT)(CLEAR)". The 7443 on forum charts is the dual filament substitute, not the factory fitment.

Where to buy
7440 Bulb
Sylvania, Philips or LED equivalent
Single filament T20 wedge used in the reverse lights on every year, the front turn signals, and the AP2 rear turn signals. LED swaps in turn signal positions may hyperflash without a resistor or LED flasher.

These are affiliate links. If you buy through one, this site may earn a commission at no extra cost to you. Parts are listed because they fit, not because of what they pay. Verify fitment against your own car before ordering.

Fitment is a starting point, not a guarantee. Confirm against your own car before ordering, especially if the lighting has been modified by a previous owner.

Want to see a feature on this site or see information that isn't correct?
Tell me what's missing and I’ll do my best to get it added.
Contact us
AP1/AP2

An independent reference for Honda S2000 owners and fans. Built because your answers should only take seconds to find.

Honda S2000 front end line drawing