Back to all bulb sizes
7443

Tail and Brake

Rear
AP1
Incandescent
2
Notes and upgrade options

AP1 cars only. The 2004 facelift replaced the tail lights with LED units, so there is no tail and brake bulb on an AP2. See the separate AP2 entry.

On AP1 cars this is a dual filament bulb handling both the running light and the brake light from one socket: Honda part 34906-ST5-003, "BULB (12V 21W/5W) (STANLEY) (DUAL FILAMENT)(CLEAR)(T20)". If the brake light works but the running light does not, or the reverse, the bulb is the likely fault rather than the wiring.

The AP1 tail lamp assemblies also take two 12V 5W wedge bulbs (Honda 34351-657-921) in addition to the two 7443s.

Where to buy
7443 Bulb
Sylvania, Philips or LED equivalent
Dual filament wedge for the AP1 tail and brake, 2000 to 2003. AP2 tail lights are LED and take no bulb, so on a 2004 to 2009 car this position does not exist.

These are affiliate links. If you buy through one, this site may earn a commission at no extra cost to you. Parts are listed because they fit, not because of what they pay. Verify fitment against your own car before ordering.

Fitment is a starting point, not a guarantee. Confirm against your own car before ordering, especially if the lighting has been modified by a previous owner.

Want to see a feature on this site or see information that isn't correct?
Tell me what's missing and I’ll do my best to get it added.
Contact us
AP1/AP2

An independent reference for Honda S2000 owners and fans. Built because your answers should only take seconds to find.

Honda S2000 front end line drawing